China manufacturer 7.5-315 Kw High Qualified Direct Drive Industrial Fixed Speed Screw Air Compressor, 3bar, 4bar, 7bar 8bar, 10bar, 13bar, 16bar, 20bar lowes air compressor

Product Description

Product Description

Genuine original air end system
·Original CZPT air end
·The third generation screw rotor profile, 5:6 asymmetric rotor
·Large rotor, low rotation speed, low specific power
·Sweden CZPT element bearings ensure the ultra-long service life of the air end

High efficiency permanent magnet motor
·Using high-performance permanent magnets, no loss of magnetism at 200°C
·IE3 Premium Efficiency
·IP55 degree of protection, Class F insulation, Class B temperature rise
·High transmission efficiency, service life of up to 15 years

High-efficiency air filter
·Filtration accuracy up to 99.5%
·Dust particles below 0.1 micron
·Service life up to 3000 hours

High-efficiency oil filter
·Filtration accuracy up to 99.5%
·Oil particles can be controlled at 0.1 micron
·Service life up to 3000 hours

High-efficiency oil gas tank
·Oversized oil gas tank improves the cyclone effect maximizing the separation process
·The high-efficiency oil gas separator ensures that the oil content is less than 2ppm
·System pressure drop is less than 0.2bar
·Service life of oil gas separator is up to 3000 hours

Energy-saving air inlet valve
·Large suction area
·Low load energy consumption in unloaded operation
·Cast aluminum maintenance free design
·Fast check: prevent unloading and shutdown oil injection

Classic cooler design
·Oversized cooler design
·Easy access for maintenance
·Anti-corrosion coating on surface

High-quality cooling fan
·Compact
·Low noise level
·High capacity for optimized cooling
·Low power consumption

Highly integrated microcomputer controller
·7.0 inch full color touch screen
·Full graphical flow diagram
·Multiple languages
·Real-time operation/maintenance/alarm information
·Operation record/chart display
·Weekly and daily scheduling, service history and plHangZhou
·On board RS485 interface, Modbus RTU

 

Product Parameters

Model Motor Power Maximum Working Pressure Free Air Delivery Air Outlet Pipe Diameter Weight Dimensions(L*W*H)
kW hp bar(g) psig m³/min cfm kg mm
BG10A 7.5 10 7 102 1.2 42 G1/2″ 190 900*650*850
8 116 1.1  39
10 145 0.9  32
13 189 0.7  25
BG15A 11 15 7 102 1.7 60 G3/4″ 320 1060*750*1000
8 116 1.6  57
10 145 1.3  46
13 189 1.0  35
BG20A 15 20 7 102 2.4 85 G3/4″ 340 1060*750*1000
8 116 2.2  78
10 145 2.0  71
13 189 1.6  57
BG25A 18.5 25 7 102 3.1 109 G1″ 400 1150*850*1140
8 116 2.9  102
10 145 2.7  95
13 189 2.2  78
BG30A 22 30 7 102 3.6 127 G1″ 430 1150*850*1140
8 116 3.4  120
10 145 3.2  113
13 189 2.7  95
BG40A 30 40 7 102 5.2  184 G1″ 460 1150*850*1140
8 116 5.0  177
10 145 4.0  141
13 189 3.1  109
BG50A 37 50 7 102 6.4  226 G1-1/2″ 650 1350*1000*1340
8 116 6.3  222
10 145 5.4  191
13 189 4.7  166
BG60A 45 60 7 102 7.3  258 G1-1/2″ 700 1350*1000*1340
8 116 7.2  254
10 145 6.2  219
13 189 5.7  201
BG75A 55 75 7 102 9.5  335 G2″ 1050 1700*1200*1550
8 116 9.4  332
10 145 8.2  290
13 189 6.7  237
BG100A 75 100 7 102 12.4  438 G2″ 1100 1700*1200*1550
8 116 12.2  431
10 145 10.8  381
13 189 9.1  321
BG125A 90 125 7 102 15.4  544 G2″ 1500 2100*1300*1650
8 116 15.0  530
10 145 13.3  470
13 189 11.4  403
BG150A 110 150 7 102 20.1  710 DN80 2650 2500*1650*1900
8 116 19.9  703
10 145 16.3  576
13 189 14.5  512
BG180A 132 180 7 102 23.4  826 DN80 2800 2500*1650*1900
8 116 23.0  812
10 145 19.7  696
13 189 16.0  565
BG220A 160 220 7 102 27.5  971 DN80 3950 3000*1900*1950
8 116 27.0  954
10 145 22.5  795
13 189 21.0  742
BG250A 185 250 7 102 30.5  1077 DN80 4100 3000*1900*1950
8 116 29.5  1042
10 145 27.0  954
13 189 22.5  795
BG300A 220 300 7 102 38.0  1342 DN100 5000 3600*2200*2200
8 116 37.0  1307
10 145 33.0  1165
13 189 28.5  1006
BG340A 250 340 7 102 44.0  1554 DN100 5900 3600*2200*2200
8 116 42.5  1501
10 145 37.5  1324
13 189 31.5  1112
BG420A 315 420 7 102 56.0  1978 DN125 6500 4000*2300*2300
8 116 54.0  1907
10 145 49.0  1730
13 189 43.0  1519

Company Profile

Wallboge is a high-tech enterprise and is considered 1 of the leading manufacturers of air compressor products in China. Our goal is to provide exceptional customer service coupled with quality products and energy saving solutions.

Wallboge’ s primary businesses focus in following key areas:

Integrated screw air compressor for laser cutting
Permanent magnet variable frequency screw air compressor
Two-stage compression permanent magnet variable frequency screw air compressor
Low pressure two-stage compression permanent magnet variable frequency screw air compressor
Low pressure permanent magnet variable frequency screw air compressor
Water-lubricated oil-free screw air compressor
Fixed speed screw air compressor
Oil-free screw blower
Screw vacuum pump

At Wallboge, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CZPT has been exporting to more than 150 countries across the globe. 

Wallboge continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CZPT improved rapidly. Wallboge’ s vision is to be a world-renowned high-end energy-saving machinery brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff, committed to continuously satisfying the needs of global companies by providing a full range of industrial air compression solutions.

Certifications

 

Exhibitions

After Sales Service

1. 24/7 after sales service in different languages.
2. Online instruction for installation and commissioning.
3. On-site instruction for installation and commissioning provided by well-trained engineers or local authorized service center.
4. CZPT agents and after sales service available.
 

Our Advantages

1. Proven product quality.
2. Factory direct prices.
3. On-time delivery.
4. Prompt technical support in different languages before sales, in sales and after sales.
5. Small orders accepted to check quality first.
6. OEM & ODM service available.

 

FAQ

Q1: Are you a factory or a trading company? 
A1: We are a factory. Please check our Company Profile.

Q2: What is the exact address of your factory? 
A2: No. 588, East Tonggang Road, Shaxi Town, HangZhou City, ZheJiang Province, China

Q3: What is your delivery time?
A3: For standard voltage, the delivery time is 15 working days after you confirm the order. For non-standard voltage, please contact our sales to confirm the delivery time.

Q4: What kind of payment terms do you accept?
A4: We accept T/T, L/C at sight.

Q5: How long is the warranty of your air compressor?
A5: 2 years for the whole air compressor except consumable spare parts.

Q6: How long could your air compressor be used?
A6: Generally, more than 10 years.

Q7: What is your MOQ requirement?
A7: 1 unit.

Q8: Can you offer OEM & ODM service?
A8: Yes, with a professional design team, we can offer OEM & ODM service.

Shipping Cost:

Estimated freight per unit.



To be negotiated
After-sales Service: Engineers Available to Overseas Service.
Warranty: 2 Years
Lubrication Style: Lubricated
Customization:
Available

|

air-compressor

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China manufacturer 7.5-315 Kw High Qualified Direct Drive Industrial Fixed Speed Screw Air Compressor, 3bar, 4bar, 7bar 8bar, 10bar, 13bar, 16bar, 20bar   lowes air compressorChina manufacturer 7.5-315 Kw High Qualified Direct Drive Industrial Fixed Speed Screw Air Compressor, 3bar, 4bar, 7bar 8bar, 10bar, 13bar, 16bar, 20bar   lowes air compressor
editor by CX 2023-05-23

Recent Posts